Panasonic MAD Series, Руководство по эксплуатации

Страница: 16 / 27

− B31 − − B30 −
English
Setup with the PC
It is possible to connect your personal computer to connector X1 of MINAS A5E using
a USB cable for personal computer connection. Downloading the setup support soft-
ware “PANATERM” from our web site and installing it on your personal computer will
allow you to perform the following easily.
• With the PANATERM, you can execute the followings.
1) Setup and storage of parameters, and writing to the memory (EEPROM).
2) Monitoring of I/O, pulse input and load factor.
3) Display of the present alarm and reference of the error history.
4) Data measurement of the wave-form graphic and bringing of the stored data.
5) Normal auto-gain tuning
6) Frequency characteristic measurement of the machine system.
Note
Because no production software such as CD-ROM is available, down-
load the setup support software from our web site and install it on your
personal computer.
• How to Connect
• USB cable
On the driver, use commercially available USB mini-B connector.
The connector on the personal computer side should be in accordance with the
specifications of the PC.
When the cable does not have noise filter, attach a signal line noise filter (DV0P1460)
to both ends of the cable.
4. Parameter
Outline / Setup / Connection
Connect to X1
(USB mini-B)
Setup support software “PANATERM”
Please download from our web site and
use after install to the PC.
4. Parameter
Composition of Parameters
• The parameter No. is displayed in the form of PrX.YY (X: Classification, YY: No.).
• For the details on the parameters, refer to the Operating Instructions (Overall).
Parametr No.
Class name Group
Class No.*
0 00 to Basic setting Parameter for Basic setting
1 00 to Gain adjustment Parameter for Gain adjustment
2 00 to Damping control Parameter for Damping control
3 00 to Internal verocity
control
Parameter for Internal verocity control
4 00 to I/F monitor setting Parameter for I/F monitor setting
5 00 to Enhancing setting Parameter for Enhancing setting
6 00 to Special setting Parameter for Special setting
* The Parameter No. consists of 2 digits.