- 125 -
Advanced (Recording pictures)
1
Press
2
/
1
to select a film and then press [MENU/SET].
• When you press [DISPLAY] on the screen shown right,
explanations about each Film Mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
2
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to close the menu.
∫
Adjusting each Film Mode to the desired setting
1
Press
2
/
1
to select a film.
2
Press
3
/
4
to select an item and
2
/
1
to adjust.
• Registered settings are memorized even if the camera is turned
off.
3
Press
3
/
4
to select the [MEMORY] and then press
[MENU/SET].
4
Press
3
/
4
to select an item, and then press [MENU/SET].
• You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the Film Mode name that was registered
previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and [STANDARD]
(
) is registered in [MY FILM 2] at the time of purchase.
Item
Effect
[CONTRAST]
[
r
]
Increases the difference between the brightness and the
darkness in the picture.
[
s
]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[
r
]
The picture is sharply defined.
[
s
]
The picture is softly focused.
[SATURATION]
[
r
]
The colors in the picture become vivid.
[
s
]
The colors in the picture become natural.
[NOISE REDUCTION]
[
r
]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[
s
]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
