6
ACCEPTANCE INSPECTION
In connection with the Products you have pur
chased from us or with the Products delivered to your premises,
please perform an acceptance inspection with all due speed and, in connection with the handling of our
Products both before and during the acceptance inspection, please give f
ull consideration to the control and
preservation of our Products.
WARRANTY PERIOD
Unless otherwise stipulated by both parties, the warranty period of our Products is one year after the purchase
by you or after their delivery to the location specified by you.
The consumable items such as battery, relay, filter and other supplemental materials are excluded from the
warranty.
SCOPE OF WARRANTY
In the event that Panasonic Industrial Devices SUNX confirms any failures or defects of the Products by
reasons solely attributable to Panasonic Industrial Devices SUNX during the warranty period, Panasonic
Industrial Devices SUNX shall supply the replacements of the Products, parts or replace and/or repair the
defective portion by free of charge at the location where the Products were purchased or delivered to your
premises as soon as possible.
However, the following failures and defects are not covered by warranty and we are not responsible for such
failures and defects.
(1) When the failure or defect was caused by a specification, standard, handling method, etc. which was
specified by you.
(2) When the failure or defect was caused after purchase or delivery to your premises by an alteration in
construction, performance, specification, etc. which did not involve us.
(3) When the failure or defect was caused by a phenomenon that could not be predicted by the technology at
purchasing or contracted time.
(4) When the use of our Products deviated from the scope of the conditions and environment set forth in the
instruction manual and specifications.
(5) When, after our Products were incorporated into your products or equipment for use, damage resulted
which could have been avoided if your products or equipment had been equipped with the functions,
construction, etc. the provision of which is accepted practice in the industry.
(6) When the failure or defect was caused by a natural disaster or other force majeure.
(7) When the equipment is damaged due to corrosion caused by corrosive gases etc. in the surroundings.
The above terms and conditions shall not cover any induced damages by the failure or defects of the Products,
and not cover your production items which are produced or fabricated by using the Products. In any case, our
responsibility for compensation is limited to the amount paid for the Products.
SCOPE OF SERVICE
The cost of delivered Products does not include the cost of dispatching an engineer, etc.
In case any such service is needed, contact our sales representative.
