36
DO NOT turn off power during auto-tuning operation.
DO NOT send serial commands during auto-tuning operation.
Notice
④
Press Read key while the result is displayed to save the result of successful auto tuning.
The result of setting changes depending on the length of time you press the button.
Less than 2 seconds (Table Mode):
Saves 3 types of settings and uses them switching as needed.
More than 2 seconds (Manual Mode):
Saves 1 setting and uses it.
(Refer to the section “4.3 Camera Control Mode”.)
* You may receive less than 2 or less types of settings even if in Table Mode.
* Save the setting in Manual Mode when you decode moving objects.
When the operation above is accepted, Code Reader becomes the following state for a
certain period of time and returns to the stand-by state.
*LEDs illuminate
■
■■
■
*Buzzer sound
-in Table Mode: 3 short buzzers
-in Manual Mode: 4 short buzzers
