Panasonic Link2Cell KX-TG4263SK Скачать руководство пользователя

Страница: 58 / 89

To use this feature, the following settings
are required.
–

Android phone:

Bluetooth must be

turned on.

–

Android phone:

[Application Alerts

manager]

must be turned on.

–

Handset:

“

Alert On/Off

”

must be

turned on (page 58).

If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.

Turning on

[Application Alerts

manager]

Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s

[Settings]

app.

Tap

[Accessibility]

Turn on the

[Accessibility]

and

[Application Alerts manager]

checkboxes.
Android 4.x: Open your device’s

[Settings]

app.

Tap

[Accessibility]

Turn on

[Application Alerts

manager]

Requirements

An Android device (Android 2.1 or later)

Text message (SMS) alert

For iPhone

users

This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for

iPhone users

Important:

Your cellular phone must support Message
Access Profile (MAP) specification.

For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/

To use this feature, the following settings
are required:
–

iPhone:

Bluetooth must be turned on.

–

Handset:

“

Alert On/Off

”

must be

turned on (page 58).

If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.

Alert settings for your

DECT phone

If your cellular phone is paired to the base unit
and receives notifications, the handset can
alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones

Important:

For Android users: Use the Link to Cell app
to enable the desired alerts (page 57).

Turning alert on/off

Once this feature is turned on, it will alert you
on the handset when your cellular phone
receives notifications.
–

“

”

(default): The handset alerts you.

–

“

Off

”

: The handset does not alert you.

For CELL 1:

MENU

N#6101

For CELL 2:

MENU

N#6102

MbN

: Select the desired setting.

SAVE

OFF

Setting the voice alert

You can turn on/off the voice alert.
–

“

”

(default): The handset notifies you by

voice announcement.

–

“

Off

”

: Voice announcement is not

available as alert.

For CELL 1:

MENU

N#6031

For CELL 2:

MENU

N#6032

MbN

: Select the desired setting.

SAVE

OFF

Selecting the alert tone

For CELL 1:

MENU

N#6041

For CELL 2:

MENU

N#6042

MbN

: Select the desired setting.

SAVE

OFF

For assistance, please visit http://shop.panasonic.com/support

Using Bluetooth® Devices

TA Manual_TGD86x_0921.pdf 58

2020/09/21 16:00:01

Содержание Link2Cell KX-TG4263SK


























































































Результаты поиска

Содержание Link2Cell KX-TG4263SK

Отзывы:

Похожие инструкции для Link2Cell KX-TG4263SK

Бренды по названию

Популярные бренды

Panasonic Link2Cell KX-TG4263SK, Руководство по эксплуатации

Результаты поиска

Содержание Link2Cell KX-TG4263SK

Отзывы:

Похожие инструкции для Link2Cell KX-TG4263SK

Бренды по названию

Популярные бренды