Panasonic Link2Cell KX-TG4263SK, Руководство по эксплуатации

Страница: 33 / 89

block function is on, change the access code
(3 digits max.). The default setting is
“
1
” .
1
M MENU N#789
2
M CLEAR N
3
Enter the new access code. a M SAVE N
a M OFF N
Displaying and clearing the
blocked call count
The total number of blocked calls (up to
65,000) will be displayed.
1
M MENU N#790
R To exit, press M OFF N .
2
M CLEAR N
3
MbN : “
Yes
” a M SELECT N a M OFF N
Adding to the allow name list
You can allow specific callers to pass through
by adding the caller’s name to the allow name
list even if you do not know the caller’s
number.
You can store up to 100 names (16 characters
max.). If the name stored in the allow name list
matches the incoming Caller ID, the unit rings.
Callers listed in the allow name list are not
required to enter the access code.
Adding allowed names from the
caller list
n When a cellular phone is paired:
1
MCN CID
2
MbN : Select the desired entry. a
M SELECT N
3
M SAVE N
4
MbN : “
Allow name
” a M SELECT N
a M OFF N
n When a cellular phone is not paired:
1
MCN CID
2
MbN : Select the desired entry. a
M MENU N
3
MbN : “ Save allow name ” a
M SELECT N a M OFF N
Viewing/erasing an entry
1
M MENU N#794
2
MbN : Select the desired entry.
R After viewing, press M OFF N to exit.
3
M ERASE N a MbN : “
Yes
” a M SELECT N
a M OFF N
Erasing all entries
1
M MENU N#794
2
M ERASE N a MbN : “
Yes
” a M SELECT N
3
MbN : “ Yes ” a M SELECT N a M OFF N
Greeting message for automated
call block
When the unit answers a call, a greeting
message is played to the caller.
You can use either:
– your own greeting message and
pre-recorded greeting message
– pre-recorded greeting message
Recording a greeting message for
automated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
“Hi, you have reached xxxxxx (Name).”
“Thank you for your calling, You have reached
xxxxxx (Name).”
“Hi, you have reached the xxxxxx (Name)
residence.”
1
M MENU N#791
2
MbN : “
Yes
” a M SELECT N
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press M STOP N to stop recording.
5
The unit will play the recorded greeting
message for automated call block.
a
M OFF N
For assistance, please visit http://shop.panasonic.com/support 33
Enhanced Call Block
TA Manual_TGD86x_0921.pdf 33 2020/09/21 16:00:00