for example, while sleeping. Silent mode can
be set for each unit.
Using the phonebook’s group feature
(page 37), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R
Make sure the unit’s date and time setting
is correct (page 16).
R
We recommend turning the base unit ringer
off (page 42, 44) in addition to turning the
silent mode on.
R
If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
M
MENU
N#238
2
MbN
: Select the desired setting.
a
M
SAVE
N
R
If you select
“
Off
”
, press
M
OFF
N
to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
5
Enter the desired hour and minute you
wish to end this feature.
6
*
: Select
“
AM
”
or
“
PM
”
.
7
M
SAVE
N
a
M
OFF
N
Changing the start and end time
1
M
MENU
N#237
2
Continue from step 3, “Turning silent
mode on/off”, page 49.
Selecting groups to bypass silent
mode
1
M
MENU
N#241
2
MbN
: Select the desired groups.
a
M
SELECT
N
R
“
” is displayed next to the selected
group numbers.
R
To cancel the selected group:
MbN
: Select the group.
a
Press
M
SELECT
N
again. “
” disappears.
3
M
SAVE
N
a
M
OFF
N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or even while away from home. The
monitored handset (placed in a baby’s room,
for example) will automatically call the
monitoring handset or the phone number
stored when it detects sound.
Important:
R
Before using this feature, we recommend
that you test it and adjust the baby monitor
sensitivity as needed, especially if you plan
to monitor from outside.
R
This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R
If the unit is connected to a PBX system,
you cannot set the baby monitor.
R
During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on charger.
R
The monitored handset never rings while it
is being monitored. If the base unit is
placed near the monitored handset, we
recommend turning off the base unit ringer
volume (page 42, 44)
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a unit
The internal baby monitor feature is available:
– between handsets
– between a handset and the base unit
1
M
MENU
N#268
2
MbN
:
“
On
”
a
M
SELECT
N
For assistance, please visit http://shop.panasonic.com/support
49
Programming
TA Manual_TGD86x_0921.pdf 49
2020/09/21 16:00:01
