Panasonic Link2Cell KX-TG4263SK, Руководство по эксплуатации

Страница: 34 / 89

Resetting to the pre-recorded
greeting message for automated call
block
This procedure will erase your greeting
message for automated call block and reset to
the pre-recorded one.
1
M MENU N#793
2
M YES N a M OFF N
Playing back the greeting message
for automated call block
1
M MENU N#792
2
To exit, press M OFF N .
Telemarketing call block
In addition to Automated call block (page 32),
you can use Telemarketing call block to
further screen calls to stop telemarketer calls
from getting through.
Using this feature, you can ask callers to say
their names, and after checking the names,
you can decide whether to answer the calls or
not.
Note:
R This feature is only available for landline
calls.
R While screening calls, the call waiting
feature is unavailable (page 24, 24).
R Telemarketing call block guidance and
caller name announcement cannot be
heard using a Bluetooth headset.
Operating telemarketing call
block
1
During a landline call, lift the handset and
then press
M TELE.BLK. N .
R The unit prompts callers to say their
names.
2
To answer the call:
Press M N or MZN .
To block the call:
Press M BLOCK N *1 a M YES N .
R The unit announces that the call will be
disconnected, and disconnects the call.
R The caller will be registered to call
block list.
*1 The user can still answer the call after
pressing M BLOCK N . To answer the call,
press M N or MZN .
Note:
R If there is no response from the caller, and
the user does not press any keys in step 2
within 20 seconds, the unit will announce
that the call will be disconnected, and
disconnects the call.
R While on the charger, the M TELE.BLK. N key
is not available. Lift the handset from the
charger to use this feature.
R To use this feature, set the Auto talk feature
to
“
Off
” .
One ring scam alert
One ring scam alert notifies the user when
calling back a number that is judged as one
ring scam caller. This can help reduce the risk
of high billing international call during call back.
During an incoming call, if the caller ends the
call after 1 or 2 rings, the call is judged as one
ring scam caller. The default setting is
“
1 or
2 rings ” .
Note:
R This feature is available during an incoming
call in the following situations:
– When Automated call block is set to
“
Unblock
” (page 32).
– When the “
One ring for blocked
call
” is set to “
No
” (page 30).
– When the ring count for answering
system is set more than 2 rings
(page 67).
R The call will not be judged as one ring scam
call in the following conditions:
– Answer a call by pressing
M N , MZN or
Auto talk (page 23).
– Answer by Answer by voice Command
(page 28).
– Block call with call block feature
(page 29).
34 For assistance, please visit http://shop.panasonic.com/support
Enhanced Call Block
TA Manual_TGD86x_0921.pdf 34 2020/09/21 16:00:00