Panasonic KX-UT670 Скачать руководство пользователя страница 78

Страница: 78 / 250

Value Range

Max. 40 characters

Note

•

You cannot leave this field empty.

•

If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.

•

If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.

•

If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.

•

If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.

Default Value

Panasonic_{MODEL}/{fwver} ({mac})

Configuration File Reference

HTTP_USER_AGENT (Page 155)

4.4.3.2 HTTP Authentication

Authentication ID

Description

Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.

Value Range

Max. 127 characters

Default Value

Not stored.

Authentication Password

Description

Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.

Value Range

Max. 127 characters

Default Value

Not stored.

4.4.3.3 Proxy Server Settings

Enable Proxy

Description

Selects whether to use the proxy server.

Note

•

The unit’s Web server proxy settings are also used for
provisioning and updating the firmware.

Value Range

•

Yes

•

Default Value

Administrator Guide

Document Version 2012-07

Section 4 Web User Interface Programming

Содержание KX-UT670



























































































































































































































































Результаты поиска

Содержание KX-UT670

Отзывы:

Похожие инструкции для KX-UT670

Бренды по названию

Популярные бренды

Panasonic KX-UT670, Руководство администратора

Результаты поиска

Содержание KX-UT670

Отзывы:

Похожие инструкции для KX-UT670

Бренды по названию

Популярные бренды