Panasonic KX-TVS50 - 2 Port Voicemail System, Руководство по установке

Страница: 288 / 416

SYSTEM ADMINISTRATOR'S GUIDE
288 Installation Manual
Other Parameters-Fax Management
You can program the VPS to automatically forward incoming fax calls to a fax extension. You
can specify a maximum of 2 fax extensions as the destination for the Automatic Fax Transfer.
If the main fax extension is not available to receive a fax, the VPS will forward the fax
transmission to the alternate fax extension.
Paging Code
for Group 1-8
(KX-TVS50)
or
Paging Code
for Group 1-16
(KX-TVS80)
Up to 12 digits
consisting of
0-9, ,# for each
group
(Group 1-8:
331-338;
All Groups
[Group 9]: 33 )
or
(Group 1-16:
3301-3316;
All Groups
[Group 17]: 33 )
Specifies the intercom paging access code required by
the PBX.
Note: The Intercom Paging Group Number available
for each subscriber is determined on a COS-by-COS
basis.
Paging Code
for All Groups
To access the proper menu for Fax Management, follow the menu path as shown:
System Administration Top Menu-1-5-7-8
Table 68
Parameter Value Range
(Default)
Description/Function
Automatic
Transfer of
Incoming Fax
Call 1: Disable
2: Enable
(Disable)
Enables or disables the Automatic Transfer of Incoming
Fax Call Service.
Note: Automatic detection works for only the first 30s.
Main Fax
Extension No. 2-5 digits
(None)
Specifies the main fax extension number.
Table 67
Parameter Value Range
(Default)
Description/Function