Panasonic KX-TVS50 - 2 Port Voicemail System, Руководство по установке

Страница: 107 / 416

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 107
4.5.5 Live Call Screening Private/Hands-Free Mode Assignment via
Station Programming
This program assigns a VPS response for when a message is being left in a mailbox. It
determines whether an alert tone is sent or whether the recorded message is played through the
built-in speaker of the extension. The default mode is hands-free. (This is a station level
program and should be done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.5.6
Live Call Screening
Assignment via PC Programming).
1.
Enter Station Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-T series PBX that uses DPT Integration
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Dial the code for the mode you want this telephone to have.
Hands-Free = Press #11 (for KX-TA624) or [71] (for KX-T series PBX that uses DPT
Integration).
Private = Press #12 (for KX-TA624) or [72] (for KX-T series PBX that uses DPT
Integration).
Screen output: Hands-Free or Private
3.
Press STORE.
4.
For KX-TA624
Set the MEMORY switch to "SET".
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
5.
Repeat these steps for each telephone.
For the KX-T series PBX that uses DPT Integration:
A single-line telephone that is connected to the same extension as a proprietary telephone can
also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is being
recorded. To intercept the call, flash the hook.
Conditions: None