Panasonic KX-TVP100, Руководство по установке

Страница: 290 / 341

W-0-4 Worksheets
f) External Stations ONLY (trunks) YES / NO
Is CALLED party information (inband DTMF signaling)
passed?
YES / NO
Is CALLING party information (inband DTMF signaling)
passed?
YES / NO
Can the Switch provide Message Waiting Notification from
a Single Line set? YES / NO
a) Turn ON any Message Waiting Indicator? YES / NO
What is the “ON” sequence? _______________________________
b) Turn OFF any Message Waiting Indicator? YES / NO
What is the “OFF” sequence? ______________________________
Type of Message Waiting Notification provided YES / NO
a) Message Waiting Indication via (Digital Display) YES / NO
b) Message Waiting Indication via (Lamp) YES / NO
c) Message Waiting Indication via (Stutter dial tone) YES / NO
When a station calls another (single line) station (station to station)
a) is CALLING party information (inband DTMF signaling) passed? YES / NO
b) is “speed dialing” supported by this switch? YES / NO
c) can it be programmed to provide CALLING party into via
DTMF signaling? YES / NO
If far end disconnect signaling supported? YES / NO
a) Can the Switch provide “open loop current” when the far
end disconnects? YES / NO
b) Can the Switch provide “silence” when the far end disconnects? YES / NO
c) Can the Switch provide a “constant tone” when the far
end disconnects? YES / NO
(i.e. dial-tone or equivalent ... a minimum of 10 seconds is required)
d) Can the Switch provide a DTMF sequence when the far
end disconnects? YES / NO
if so, what is the sequence? ________________________________