Panasonic KX-TVP100, Руководство по установке

Страница: 260 / 341

7-8
Maintenance
7.1 Utility Commands
The memory which is required for the data terminal to be used for this feature is as
follows:
1. Program — approximately 1 MBytes
2. Parameters — approximately 0.3 MBytes
3. System Prompts — approximately 15 MBytes
4. User Prompts–1
5. User Prompts–2
6. Custom Service Menu
7. Personal Greeting
1
Type “SAVE”, then press [RETURN].
2
Select item to be backed up, then press [RETURN].
3
Press [RETURN].
4
Set the data terminal to the receiving (Answer) mode (Xmodem). Then specify
the backup filename.
The specified data will be transmitted to the data terminal.
Notes: • The data terminal used must be equipped with communications
software that supports the Xmodem file transfer protocol.
• You can cancel this command by pressing ‘\’ before entering the
receiving mode. Once you have selected the receiving mode, use
the cancel command of the communication software which you use.
(e.g., “quit” for the Crosstalk)
$ SAVE
VPS Disk Data Save (VPS
→
PC : Xmodem)
1: Program
2: Parameters
3: System Prompts
4: User Prompts–1
5: User Prompts–2
6: Custom Service Menu
7: Personal Greeting
Select No. :=
To start press ‘RETURN’
Start - - - - - Save !!
depending upon the length of the
recorded messages.