Panasonic KX-TS100EXW, Руководство по обслуживанию

Страница: 12 / 26

12. CIRCUIT OPERATIONS
Note: The circuit diagram may be modified at any time with the development of new technology.
12.1. Telephone Line Interface
When the hook switch SW1 is ON (off-hook), the circuit is closed, and current is supplied to the
base of Q2 via the diode bridge D1 and Q2 is On Q1 is ON (OFF-HOOK condition).
12.2. Tone Dial Circuit
Function:
The tone dialing circuit consists of a DTMF (Dual Tone Multi Frequency) signal generator
(outputted from Pin 11 of the IC1) for tone dialing, and also a circuit for outputting the signal to
line.
The DTMF circuit identifies inputs from the 12 keys (1,2,3,4,5,6,7,8,9,0, and #) by means of a
total of seven frequencies, that is four low frequencies (Low group) and three high frequencies
(High group).
Circuit Description:
When a dial key is pressed, a DTMF signal is output from Pin 11 of IC1 as an analog synthetic
wave.
The signal flow to the line is as follows.
Pin 11 of IC1 R37 Q9 Q3 Q1 Tel Line.
The DTMF signal is sent to the line via the following path. Q9 and Q3 is an amplifier which is used
12