manualshive.com logo in svg

Panasonic KX-TGW420, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TGW420 Скачать руководство пользователя страница 36

frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is 
no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and 

receiver.

– Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV 

technician for help.

Some cordless telephones operate at frequencies that 
may cause interference to nearby TVs and VCRs. To 
minimize or prevent such interference, the base of the 
cordless telephone should not be placed near or on top 
of a TV or VCR. If  interference is experienced, move the 
cordless telephone further away from the TV or VCR. 
This will often reduce or eliminate interference.

FCC RF Exposure Warning:

L

 This product complies with FCC radiation exposure 

limits set forth for an uncontrolled environment. 

L

 To comply with FCC RF exposure requirements, the 

base unit must be installed and operated 20 cm (8 
inches) or more between the product and all person’s 
body. 

L

 This product may not be collocated or operated in 

conjunction with any other antenna or transmitter.

FCC Warning:

To ensure compliance with FCC emissions limits, use
only the provided USB cable with ferrite core when
connecting the unit to a computer.

Notice

L

 FCC ID can be found on the bottom of the units.

36

For assistance, please visit http://shop.panasonic.com/support

Useful Information

TGW420_(en)_OI_1226_ver06.pdf   36

2019/12/26   13:15:33

Содержание KX-TGW420

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды