Panasonic KX-TGP600G, Руководство по эксплуатации

Страница: 117 / 132

System Settings
The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see “Character Table for Administrator Password”, Page 106.
Sub Item Description Setting Default
Register H/S Registers the handset/desk
phone selected from the list to
the base unit currently
connected. Select the handset/desk
phone. —
Cancel Register Cancels the handset/desk
phone registration between
the handset/desk phone and
the base unit. Select the handset/desk
phone. —
Change Base PIN Changes the PIN (4 digits) of
the base unit. Enter PIN
¯
Enter New PIN
¯
Verify New PIN
1234
Set Time & Date *1
Specifies the time and date of
the handset/desk phone. — —
Repeater Mode Selects whether or not to use
the repeater. On
Off Off
MultilineSetting Specifies the multiline mode.
Incoming Call
*2
Line 1–8
Handset 1–8
Outgoing Call
*3
Handset 1–8
Line 1–8
Default Line
*4
Incoming Call:
Handset 1–8
Outgoing Call:
Line 1–8
Default Line:
Line 1
Authentication
*5 Specifies the ID and password
for HTTP authentication.
–ID
*5
–Password *5
Not stored
Access Code
*6 Specifies the access code to
access the redirect server. Max. 16 characters Not stored
Xsi Setting
*7 Specifies the ID and password
for the Xsi service. Line 1–8
ID
*5
Password
*5
Not stored
UC Setting
*7 Specifies the ID and password
for the Broadsoft UC service
(IM&P). Handset 1–8
ID
*5
Password
*5
Not stored
Parallel Setting
(KX-TPA65/
KX-TPA68) Register/deregister the paired
handset of the desk phone. Master Handset
Pairing
*8
Mode
Busy
Take Over Call
Pairing: Off
Restart (Base) *9
Restart the base unit.
Yes
No
—
*1 Availability depends on your phone system. Contact your administrator for further information.
117
Appendix