Panasonic KX-TGP600G, Руководство по эксплуатации

Страница: 51 / 132

[ D ]/[ C ]: "Ringer Volume" a
OK
3. [ D ]/[ C ]: Select the desired setting. a
OK
*1
*1 When using a KX-TPA65/KX-TPA68, the volume can also be adjusted by using
/[VOL].
Note
R You can press the [ D ] key instead of performing steps 1 and 2.
R For details about setting the ringer pattern, see “Incoming Option”, Page 107.
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off:
Note
R If you attach a headset while receiving an incoming call, the ring from the handset does not switch to
the headset. If you attach a headset before receiving an incoming call, and headset ringer is set to
"On", ringing will be heard from the headset.
To adjust the ringer volume
1. [ D ]/[ C ]: Adjust the volume.
*1
2. KX-TPA60:
, / /[XFER/CLR]: Exit
KX-TPA65/KX-TPA68:
/[CANCEL], / /[TRANSFER/CLEAR]: Exit
*1 The adjusted volume level will also be used for subsequent calls.
When using a KX-TPA65/KX-TPA68, the volume can also be adjusted by using /[VOL].
To turn the ringer off
1.
Incoming/Outgoing Call Log
When connecting the desk phone and handset in parallel, the Incoming/Outgoing Call Log is shared
between the desk phone and handset. For details about parallel connection settings, see “Parallel Mode
(KX-TPA65/KX-TPA68)”, Page 52.
Displaying the Incoming Call Log
[In standby mode]
1. [ F ]
2. [ D ]/[ C ]: "Incoming Log" a
OK
*1
*1 If "Missed Calls" is not displayed on the LCD in standby mode, this step can be skipped.
When connected to a base unit other than the KX-TGP600, since "Incoming Log" is not displayed,
select from "Missed Call"/"Answered Call".
Note
R For details about the other operations, see “Screen Transition Diagram”, Page 48.
Displaying the Outgoing Call Log
[In standby mode]
1. [ C ]
*1
*1 You can also press
/ .
51
Before Operating the Telephones