Panasonic KX-TGP600G, Руководство по эксплуатации

Страница: 101 / 132

e. [ D ]/[ C ]: "Register H/S" a
OK
f. Select a base unit. a
OK
After "Registered" is displayed on the LCD, the registration is completed.
R If 4 base units have been registered to a handset/desk phone, "Memory Full" is displayed on the LCD
at step d.
*1 The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see “Character Table for Administrator Password”, Page 106.
Handset/desk phone registration using the handset/desk phone
If operation using the base unit is difficult, or if you want to specify the handset/desk phone number
during registration, you can use a registered handset/desk phone to add new handsets/desk phones.
Before operating the handset/desk phone, confirm that the STATUS indicator of the base unit is Green
(On/Slow Flashing/Quick Flashing).
1. Registered handset/desk phone:
a. /
MENU
/
Menu
b. KX-TPA60/KX-TPA65:
[ D ]/[ C ]/[ F ]/[ E ]: a
OK
KX-TPA68:
[
D ]/[ C ]: "System Settings" a
OK
c. [ D ]/[ C ]: "System Settings"
*1
a
OK
d. [ D ]/[ C ]: "Register H/S" a
OK
e. Select a handset/desk phone. a
OK
If more than 5 handsets/desk phones are registered, you can press
NEXT
to scroll down.
The STATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
Follow the procedure from step 2 above with the handset/desk phone you want to add.
*1 The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see “Character Table for Administrator Password”, Page 106.
Deregistering a Handset/Desk Phone
A handset/desk phone can cancel its own registration (or the registration of another handset/desk phone)
that is stored to the base unit. This allows the handset/desk phone to end its wireless connection with the
system.
1. Handset/desk phone:
In standby mode, press /
MENU
, and then press [ E ] and [ C ] to select . a
OK
2. Handset/desk phone:
[ D ]/[ C ]: "System Settings"
*1
a
OK
3. Handset/desk phone:
[ D ]/[ C ]: "Cancel Register" a
OK
4. Handset/desk phone:
Select a handset/desk phone. a
OK
*1 The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see “Character Table for Administrator Password”, Page 106.
101
Installation and Setup