Useful Information
47
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
The handset beeps and/or
3
flashes.
L
Battery charge is low. Fully charge the
batteries (page 13).
I fully charged the batteries, but
3
still flashes.
L
Clean the charge contacts and charge again
(page 14).
L
It is time to replace the batteries (page 13).
I fully charged the batteries, but
the operating time seems to be
shorter.
L
Clean the battery ends (
S
,
T
) and the
charge contacts with a dry cloth, and charge
again.
Problem
Cause/solution
w
is flashing.
L
The handset is not registered to the base unit.
Register it (page 29).
L
The handset is too far from the base unit.
Move closer.
L
The base unit’s AC adaptor is not connected.
Check the connections.
L
You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
Noise is heard, sound cuts in
and out.
L
You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
The handset does not ring.
L
The ringer volume is turned off. Adjust ringer
volume (page 23).
L
Night mode is turned on. Turn it off
(page 27).
The base unit does not ring.
*1
L
The ringer volume is turned off. Adjust ringer
volume (page 24).
TG8011_8021BX(e).book Page 47 Monday, September 29, 2008 1:07 PM