Preparation
14
Note:
L
It is normal for the handset to feel
warm during charging.
L
If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L
Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Screen saver mode
The backlight goes dark when on a
call or turns off completely after 1
minute of inactivity
if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pressing
{
<
}
or
{
>
}
when on a call.
– pressing
{ih}
at all other times.
Wall mounting
Base unit
Battery icon
Battery level
1
High
2
Medium
3
Low
L
When flashing:
Needs charging.
Operation
Operating time
In continuous use
14 hours max.
Not in use
(standby)
240 hours
(10 days) max.
Hook
85 mm
Screws
(Not supplied)
Longer than
20 mm
Space
(6 mm)
TG8011_8021BX(e).book Page 14 Monday, September 29, 2008 1:07 PM
