Useful Information
51
Making/answering calls, intercom
*1 KX-TG7321
Problem
Cause/solution
w
is flashing.
L
The handset is not registered to the base unit.
Register it (page 28).
L
The handset is too far from the base unit.
Move closer.
L
The base unit’s AC adaptor is not connected.
Check the connections.
L
You are using the handset or base unit in an
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
Noise is heard, sound cuts in
and out.
L
You are using the handset or base unit in an
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
The handset does not ring.
L
The ringer volume is turned off. Adjust ringer
volume (page 24).
The base unit does not ring.
*1
L
The ringer volume is turned off. Adjust ringer
volume (page 25).
I cannot make a call.
L
The dialling mode may be set incorrectly.
Change the setting (page 17).
L
The handset is too far from the base unit.
Move closer and try again.
L
Another unit is in use. Wait and try again later.
L
Answering system is being used.
*1
Wait and
try again later.
L
The key lock feature is turned on. Turn it off
(page 21).
TG7301-7321FX(e).book Page 51 Wednesday, March 26, 2008 5:19 PM