Preparation
15
Important:
L
If the handset does not automatically
turn on after installing/replacing
batteries, press
{ih}
for about 1
second, or place the handset on the
base unit or charger.
Note:
L
When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
L
While charging,
“
Charging
”
is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged,
“
Charge
Completed
”
displays. The charge
indicator stays lit even after the
batteries are fully charged.
*1 Model shown is KX-TG7301.
*2 KX-TG7302
Note:
L
It is normal for the handset to feel
warm during charging.
L
If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L
Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
Base unit
*1
Charger
*2
Battery icon
Battery level
1
High
2
Medium
3
Low
L
When flashing:
Needs charging.
Operation
Operating
time
In continuous use
17 hours max.
Not in use
(standby)
150 hours
max.
TG7301-7321FX(e).book Page 15 Wednesday, March 26, 2008 5:19 PM
