Programming
25
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*3 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*4 The default display language will be as follows if you select the following regional
codes when changing the unit’s region setting (page 27):
*5 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*6 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*7 KX-TG7321
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
*9 When using the unit in Czech/Slovakia, select
“
100 msec.
”
as the recall/flash
time. If you change the unit’s region setting/reset the base unit, the recall/flash
time will be reset to the default setting. In this case, select
“
100 msec.
”
again.
Base Unit Setup
*1
Ringer Volume
*7
<
Medium
>
–
–
Dial Mode
<
Tone
>
–
17
Recall/Flash
*8,
*9
<
600 msec.
>
–
20
Base Unit PIN
<
0000
>
–
27
Repeater Mode
<
Off
>
–
29
Country
<
Other
>
–
27
Top-menu
Sub-menu 1
Sub-menu 2
Page
TG7301-7321FX(e).book Page 25 Wednesday, March 26, 2008 5:19 PM