Useful Information
53
Answering system (KX-TG7321)
The SMS message centre
number is logged in the caller
list and the message is not
received.
L
Someone tried to send you a message while
SMS is turned off. Turn it on (page 32).
“
FD
”
is displayed.
L
The unit could not connect to the SMS
message centre. Confirm that the correct
SMS message centre numbers are stored
(page 32). Confirm that SMS is turned on
(page 32).
“
FE
”
is displayed.
L
An error occurred while sending the message.
Try again.
“
E0
”
is displayed.
L
Your phone number is permanently withheld
or you have not subscribed to the appropriate
service. Contact your service
provider/telephone company.
“
Q
” is not displayed after I read
a message.
L
When an error code (
“
FD
”
,
“
FE
”
, or
“
E0
”
) is
displayed, “
Q
” will not be displayed even if
you have read the message.
Problem
Cause/solution
The unit does not record new
messages.
L
The answering system is turned off. Turn it on
(page 36).
L
The message memory is full. Erase
unnecessary messages (page 38).
L
The recording time is set to
“
Greeting
Only
”
. Change the setting (page 41).
L
If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 40).
My own greeting message
cannot be properly heard.
L
Record your own greeting message again
(page 37).
I cannot operate the answering
system.
L
Someone is using the unit. Wait for the other
user to finish.
L
A caller is leaving a message. Wait for the
caller to finish.
L
The handset is too far from the base unit.
Move closer.
Problem
Cause/solution
TG7301-7321FX(e).book Page 53 Wednesday, March 26, 2008 5:19 PM