Intercom
58
Voice Paging
The base unit user can make a voice announcement that is heard through the
speakers of all handsets.
•
When 4 handsets are registered to the base unit, and if one handset user is in
conversation using the Booster feature, one of the remaining 3 handsets will not
receive the voice announcement.
•
Only the handset user who answers first can talk with the base unit user.
•
To answer the page from a handset, see “Answering Intercom Calls” on page 57.
•
If a handset is too close to the base unit, you may hear feedback while making the
voice announcement. Place the handset on the base unit (or the charger, for
accessory handset users, p. 3) or press
[OFF]
.
•
It is not possible to specify which handset(s) will hear the voice announcement.
•
The speaker volume for the announcement follows the higher ringer volume level
of 2 lines on the handset (p. 26).
1
Press
[LOCATOR/INTERCOM/TRANSFER]
.
•
The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
2
To make a voice announcement to all handsets, press
[5]
(
).
•
You will hear a ringback tone (2 short beeps) and the SP-PHONE indicator
flashes.
3
When the SP-PHONE indicator stops flashing, speak into the
MIC
.
•
All handset users will hear your voice through their speakers after beeps,
“
Call from Base
” will be displayed and the Ringer/Message Alert
indicator will flash rapidly on the handsets.
•
The handset on the base unit will not be paged.
4
When finished, press
[SP-PHONE]
or
[LOCATOR/INTERCOM/
TRANSFER]
.
OR
After one of the handsets answers, speak into the
MIC
.
To disconnect the intercom, press
[SP-PHONE]
or
[LOCATOR/INTERCOM/TRANSFER]
.
Base Unit
TG6500C_CordlessTel2.fm Page 58 Thursday, September 30, 2004 4:56 PM
