Panasonic KX-TG6461E Скачать руководство пользователя

Страница: 42 / 48

Useful Information

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Programmable settings

Battery recharge

Making/answering calls, intercom

Problem

Cause/solution

I have changed the display
language to a language I cannot
read.

Change the display language (page 12).

While programming, the unit starts
to ring.

A call is being received. Answer the call and start again after
hanging up.

While programming, the display
returns to standby mode.

A call matching an entry in the call barred list is being received.
Wait and try again later.

I cannot register a handset to a
base unit.

The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 26).

You entered the wrong PIN. If you forget your PIN, see “I cannot
remember the PIN.” (page 42).

Place the handset and the base unit away from other electrical
appliances.

I cannot remember the PIN.

Change the PIN using the following method.

Handset:

(middle soft key)

{V}

{^}

“

Base Unit Setup

”

{V}

{^}

“

Base Unit PIN

”

{*}{

}{

}

Enter the new 4-digit base unit PIN.

{ih}

Problem

Cause/solution

The handset beeps and/or

)

flashes.

Battery charge is low. Fully charge the batteries (page 8).

I fully charged the batteries, but

)

still flashes.

Clean the charge contacts and charge again (page 9).

It is time to replace the batteries (page 8).

I fully charged the batteries, but
the operating time seems to be
shorter.

Clean the battery ends (

) and the charge contacts with a

dry cloth and charge again.

The handset display is blank.

The handset is not turned on. Turn the power on (page 12).

Problem

Cause/solution

is flashing.

The handset is too far from the base unit. Move closer.

The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.

You are using the base unit or handset in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.

The handset is not registered to the base unit. Register it (page
25).

TG6461E(e).book Page 42 Monday, March 16, 2009 8:50 AM

Содержание KX-TG6461E

















































Результаты поиска

Содержание KX-TG6461E

Отзывы:

Похожие инструкции для KX-TG6461E

Бренды по названию

Популярные бренды

Panasonic KX-TG6461E, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG6461E

Отзывы:

Похожие инструкции для KX-TG6461E

Бренды по названию

Популярные бренды