Programming
24
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Special programming
Alarm
You can set one of 2 different alarm options (once
or daily) at a time for each handset. An alarm
sounds at the set time for 3 minutes.
Important:
L
Set the date and time beforehand (page 13).
1
8
(middle soft key)
2
{V}
/
{^}
:
“
Handset Setup
”
i
M
3
{V}
/
{^}
:
“
Time Settings
”
i
M
4
{V}
/
{^}
:
“
Alarm
”
i
M
5
{V}
/
{^}
: Select the desired alarm option.
i
M
6
Enter the desired date and month.
i
M
7
Set the desired time.
i
M
8
{V}
/
{^}
: Select the desired alarm tone.
i
M
L
We recommend selecting a different ringer
tone to the one used for outside calls.
9
M
i
{ih}
L
When the alarm is set,
E
is displayed.
Note:
L
You can skip to step 4 by pressing
{
R/
E
}
in
standby mode.
L
To stop the alarm, press any dial key or place
the handset on the charger.
L
When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L
If you select
“
Once
”
, the setting changes to
“
Off
”
after the alarm sounds.
Changing the base unit PIN (Personal
Identification Number)
Important:
L
If you change the PIN, please make note of your
new PIN. The unit will not reveal the PIN to you.
If you forget your PIN, see page 42.
1
8
(middle soft key)
2
{V}
/
{^}
:
“
Base Unit Setup
”
i
M
3
{V}
/
{^}
:
“
Base Unit PIN
”
i
M
4
Enter the current 4-digit base unit PIN (default:
“
0000
”
).
5
Enter the new 4-digit base unit PIN.
i
M
i
{ih}
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want to
answer such as junk calls.
When a call is received, the unit does not ring while
the caller is being identified. If the phone number
matches an entry in the call barred list, the unit
sends out a busy tone to the caller, and then
disconnects the call.
Program this setting using either the base unit or
one of the handsets.
Important:
L
When the unit receives a call from a number that
is stored in the call barred list, the call is logged
in the caller list (page 27) with
7
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
barred list by using the caller list or by entering the
numbers directly.
Important:
L
It is advised to store the phone number with an
area code in the call barred list.
Y
Handset
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time. Go to
step 7.
Y
Handset
TG6461E(e).book Page 24 Monday, March 16, 2009 8:50 AM
