manualshive.com logo in svg

Panasonic KX-TG6461E, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TG6461E Скачать руководство пользователя страница 43

Useful Information

43

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Caller ID

Noise is heard, sound cuts in and 
out.

L

You are using the base unit or handset in an area with high 
electrical interference. Re-position the base unit and use the 
handset away from sources of interference.

L

Move closer to the base unit.

L

If you use a DSL/ADSL service, we recommend connecting a 
DSL/ADSL filter between the base unit and the telephone line 
jack. Contact your DSL/ADSL provider for details.

The base unit and/or handset 
does not ring.

L

The ringer volume is turned off. Adjust the ringer volume (page 
15).

I cannot make a call.

L

The handset is too far from the base unit. Move closer and try 
again.

L

Another unit is in use. Wait and try again later.

L

Answering system is being used by a handset. Wait and try 
again later.

L

The key lock feature is turned on. Turn it off (page 16).

Problem

Cause/solution

Caller information is not 
displayed.

L

You must subscribe to Caller ID service. Contact your service 
provider/telephone company for details.

L

If your unit is connected to any additional telephone equipment, 
remove and plug the unit directly into the wall jack.

L

If you use a DSL/ADSL service, we recommend connecting a 
DSL/ADSL filter between the base unit and the telephone line 
jack. Contact your DSL/ADSL provider for details.

L

Other telephone equipment may be interfering with this unit. 
Disconnect the other equipment and try again.

Caller information is displayed 
late.

L

Depending on your service provider/telephone company, the 
unit may display the caller’s information at the 2nd ring or later.

L

Move closer to the base unit.

Time on the unit has shifted.

L

Incorrect time information from incoming Caller ID changes the 
time. Set the time adjustment to 

“

Manual

”

 (off) (page 22).

The name stored in the 
phonebook is not displayed fully 
while an outside call is being 
received.

L

Edit the phonebook entry name to fit in 1 line of text (page 17).

Problem

Cause/solution

TG6461E(e).book  Page 43  Monday, March 16, 2009  8:50 AM

Содержание KX-TG6461E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды