Programming
20
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset. (KX-TG6412/KX-TG6413)
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 When the ringer volume is turned off,
~
is displayed and the handset does not ring
for outside calls.
However even when the ringer volume is set to off, the handset rings:
– at the low level for alarm (page 21) and intercom calls (page 34)
– at the high level for paging (page 34)
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*8 KX-TG6421
*9 To prevent other users from joining your conversations with outside callers, turn
this feature on.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
Base Unit Setup
*1
>
Ringer Volume
*8
<
Medium
>
–
–
Dial Mode
<
Tone
>
–
13
Privacy Mode
*9
<
Off
>
–
–
Recall/Flash
*10
<
600 msec.
>
–
15
Area Code
–
21
Base Unit PIN
<
0000
>
–
21
Repeater
<
Off
>
–
24
Caller Barred
*1,
*8
7
–
–
22
Top-menu
Sub-menu 1
Sub-menu 2
Page
TG6411-6421BX(e).book Page 20 Monday, April 27, 2009 3:13 PM