Useful Information
38
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG6421
*2 KX-TG6412/KX-TG6413
Display message
Cause/solution
Check Phone Line
L
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 8).
Error
*1
L
Recording was too short. Try again.
Failed
*2
L
Phonebook copy failed (page 18). Confirm the other
handset (the receiver) is in standby mode and try
again.
Incomplete
*2
L
The receiver’s phonebook memory is full. Erase the
unnecessary phonebook entries from the other
handset (the receiver) and try again.
Memory Full
L
The phonebook memory is full. Erase unnecessary
entries (page 17).
L
Message memory is full. Erase unnecessary
messages (page 29).
*1
L
The call barred list memory is full. Erase unnecessary
entries (page 22).
*1
No link.
Reconnect AC
adaptor.
L
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 23).
Use rechargeable
battery.
L
A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH battery noted on page 4, 6.
You must first
subscribe to
Caller ID.
L
You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
TG6411-6421BX(e).book Page 38 Monday, April 27, 2009 3:13 PM