Intercom Features
For assistance, please visit http://www.panasonic.com/consumersupport
41
Room monitor
This feature allows you to listen in on a
room where the handset or base unit is
located. The monitored extension will not
ring, allowing you to easily monitor, for
example, a baby’s room from different
areas of the house. If you want to prevent
your unit from being monitored by other
extensions, leave this feature OFF
(default).
Setting room monitor
Turning on/off the handset’s room
monitor feature
This allows the handset to be monitored.
1
Press
{
MENU
}
(middle soft key).
2
Scroll to
N
, then press
{
SELECT
}
.
3
Scroll to “
Room monitor
”, then press
{
SELECT
}
.
4
Press
{V}
or
{^}
repeatedly to select
“
On
” or “
Off
”.
5
Press
{
SAVE
}
, then press
{
OFF
}
.
Turning on/off the base unit’s room
monitor feature
This allows the base unit to be monitored.
This feature must be set by using the
handset.
1
Press
{
MENU
}
(middle soft key).
2
Scroll to
N
, then press
{
SELECT
}
.
3
Scroll to “
Set base unit
”, then press
{
SELECT
}
.
4
Scroll to “
Room monitor
”, then press
{
SELECT
}
.
5
Press
{V}
or
{^}
repeatedly to select
“
On
” or “
Off
”.
6
Press
{
SAVE
}
, then press
{
OFF
}
.
Monitoring a room
Important:
L
Before monitoring, make sure the unit to
be monitored is not in use.
L
The handset to be monitored must be off
the base unit.
L
If you receive a phone call while
monitoring a room, you will hear 2 tones
(page 53, 55). To answer the call with the
handset, press
{
OFF
}
, then press
{C}
or
{s}
. To answer the call with the base
unit, press
{
SP-PHONE
}
2 times.
Monitoring with the handset
1
Press
{
INTERCOM
}
, then press
{
MONITOR
}
.
2
To call the base unit, press
{
0
}
.
To call another handset, press its
extension number (
{
1
}
to
{
8
}
).
L
Your handset will start to monitor the
room through the destination unit.
L
To monitor from the speaker, press
{s}
. To switch back to the receiver,
press
{C}
.
3
To end monitoring, press
{
OFF
}
.
L
The base unit user can stop being
monitored by pressing
{
INTERCOM
}
or
{
SP-PHONE
}
. The monitored
handset user can stop being
monitored by pressing
{
OFF
}
.
Note:
L
The monitored handset displays “
Room
monitor
”.
TG5583.book Page 41 Friday, April 8, 2005 6:33 PM
