Programmable Settings
42
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1
Press
{
MENU
}
.
2
Enter the desired feature code (shown below).
3
Enter the desired setting code (shown below).
L
This step may vary depending on the feature being programmed.
4
Press
{
Save
}
.
5
Press
{
OFF
}
to exit programming mode.
Direct commands chart
Feature
Feature code
Setting code
Page
Ringer volume
{
1
}
{
1
}
{
1
}
: Low
{
2
}
: Medium
{
3
}
: High
{
0
}
: Off
page 36
Ringer tone
{
1
}
{
2
}
{
1
}
–
{
3
}
: Tone pattern 1–3
{
4
}
–
{
7
}
: Melody pattern 1–4
page 37
Interrupt tone
{
1
}
{
3
}
{
1
}
: On
{
2
}
: 2 times
{
0
}
: Off
page 37
Message play
{
2
}
–
page 47
Date and time
{
4
}
Go to step 3 on page 17.
page 17
Voice enhancer
{
5
}
{
1
}
: On
{
0
}
: Off
page 38
Voice changer
(Talk)
{
8
}
{
1
}
{
1
}
: Deep Voice
{
2
}
: High Voice
{
3
}
: Fun Voice
page 38
Voice changer
(Greeting)
{
8
}
{
2
}
{
1
}
: Deep Voice
{
2
}
: High Voice
{
3
}
: Fun Voice
{
0
}
: Off
page 38
Copy phonebook
(1 item)
*1
{#}
{
1
}
Go to step 4 on page 26.
page 26
Copy phonebook
(all items)
*1
{#}
{
2
}
–
page 27
LCD contrast
{
0
}
{
1
}
{
1
}
–
{
6
}
: Level 1–6
page 39
Key tone
{
0
}
{
2
}
{
1
}
: On
{
0
}
: Off
page 40
Auto talk
{
0
}
{
3
}
{
1
}
: On
{
0
}
: Off
page 38
TG5438C_5439C(e-e).book Page 42 Saturday, November 6, 2004 11:17 AM
