Programmable Settings
40
Note:
L
If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
The line mode is preset to “
B
” and
generally should not be adjusted. If “
Line
in use
” on the handset is not displayed
properly, the line mode selection is
incorrect. Set line mode to “
A
”.
1
Press
{
MENU
}
.
2
Scroll to “
Initial setting
” by
pressing
{V}
or
{^}
, then press
{
>
}
.
3
Scroll to “
Set tel line
” by pressing
{V}
or
{^}
, then press
{
>
}
.
4
Scroll to “
Set line mode
” by pressing
{V}
or
{^}
, then press
{
>
}
.
5
Press
{V}
or
{^}
repeatedly to select
the desired setting.
6
Press
{
Save
}
, then press
{
OFF
}
.
Other options
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1
Press
{
MENU
}
.
2
Scroll to “
Initial setting
” by
pressing
{V}
or
{^}
, then press
{
>
}
.
3
Scroll to “
Key tone
” by pressing
{V}
or
{^}
, then press
{
>
}
.
4
Press
{V}
or
{^}
repeatedly to select
“
On
” or “
Off
”.
5
Press
{
Save
}
, then press
{
OFF
}
.
Re-registering the handset
If “
No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L
Make sure the base unit is not being
used.
L
Have the handset and base unit near
each other when re-registering the
handset.
L
KX-TG5439C only:
Confirm the extension number of the
handset which has lost the
communication by placing the handset
on the base unit or charger.
If you re-register the handset using the
other handset’s extension number
[1]
or
[2]
, the other handset will not
function.
1
Handset:
Press
{
MENU
}
.
TG5438C_5439C(e-e).book Page 40 Saturday, November 6, 2004 11:17 AM
