Panasonic KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering... Скачать руководство пользователя

Страница: 57 / 88

Listening to Messages

Answering

System

For assistance, please call: 1-800-ADT-ASAP

Using the Cordless Handset
(Remote Operation)

If “

” flashes, there are new messages. If there are only old messages or no

messages, “

” will be displayed but will not flash.

To play back messages

•

“

” will not disappear after listening to messages.

•

During playback, the display shows the message number.

•

At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recording time if it is less than 5 minutes.

•

When there are no messages, the unit announces “

No messages

”.

•

If a call is being received during playback, the unit rings and playback stops. To
answer the call, press

[

]

[ ]

. For playback, start again from the beginning

after hanging up.

Voice menu

If you do not press any buttons at the end of the last message and hear “

End of final

message

”, the cordless handset will start the following voice menu.

“

Press 4 to play back new messages. Press 5 to play back all messages.

”

•

You can press buttons for other playback options (p. 58) even if the voice menu
has started.

•

If you do not press any button within 10 seconds after the voice menu, the
cordless handset will exit remote operation.

To turn the Answering System on

Press

[8]

during playback.

To turn the Answering System off,

press

[0]

during playback.

Press the soft key (

)

•

A beep sounds and the number of new
messages will be announced from the speaker,
and new messages will be played.

•

To switch to the receiver, press

[

]

. To switch

back to the speaker, press

[ ]

•

When you have no new messages, the unit
announces “

No new messages. All message

playback

” and plays back all messages.

•

To play all messages, press

[5]

•

If you do not press any buttons, the voice menu
will start (see below).

To end remote operation, press

[OFF]

Handset

PLAY

Received calls

A D T

PANIC PLAY

Ex. New messages exist.

PLAY

TG2970.book Page 57 Friday, October 15, 2004 6:21 PM

Содержание KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering...

























































































Результаты поиска

Содержание KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering...

Отзывы:

Похожие инструкции для KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering...

Бренды по названию

Популярные бренды

Panasonic KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering..., Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering...

Отзывы:

Похожие инструкции для KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering...

Бренды по названию

Популярные бренды