manualshive.com logo in svg

Panasonic KX-TG2581ALS, KX-TG2581NZS, Руководство по эксплуатации, Страница: 74 / 80

Поделиться
Скачать
Panasonic KX-TG2581ALS, KX-TG2581NZS Скачать руководство пользователя страница 74

74

Problem

You cannot program items,
such as the LCD contrast.

Previously programmed
information is erased.

“

Recharge

” is displayed on

the handset, “

” flashes

or the unit beeps
intermittently.

You charged the battery
fully, but “

Recharge

” is still

displayed and/or “

”

continues to flash.

The IN USE/CHARGE
indicator light does not go
out after the battery has
been charged.

Cause & Remedy

•

Programming is not possible while the
unit is in the talk mode, when viewing
the Caller List/directory list, or while the
answering system is in use.

•

Do not pause for over 60 seconds while
programming.

•

Move closer to the base unit.

•

Ö

, 

Ñ

, BACK

Ü

or FWD/EDIT

á

may have been pressed when you
picked up the handset. Press

(FUNCTION/EXIT/CH)

and try again.

•

If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.

•

Charge the battery fully (p. 13).

•

Clean the charge contacts and charge
again (p. 14).

•

Install a new battery (p. 68).

•

This is normal.

For Australian Customers
Panasonic Australia operates a toll free Customer Support Centre.
Please phone Panasonic on 132600 for assistance.

For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.

Troubleshooting

Содержание KX-TG2581ALS, KX-TG2581NZS

















































































Отзывы:

Нет отзывов