Panasonic KX-TG2581ALS, KX-TG2581NZS Скачать руководство пользователя страница 26

Страница: 26 / 80

Selecting the Caller’s Recording Time

You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s
recording time. Your phone comes from the factory set to “3 minutes”.

Press

(FUNCTION/EXIT/CH)

Press

repeatedly until the arrow

points to “

Program

”.

Press

FWD/EDIT

(

Yes

key).

Press

repeatedly until the arrow

points to “

TAD program

”.

Press

FWD/EDIT

(

Yes

key).

•

“P” is displayed on the base unit.

Press

(5)

•

The current setting is displayed on the base unit.

1: 1 minute
2: 3 minutes
3: Greeting only

Press

(1)

(2)

(3)

to select the recording time.

•

The setting is displayed on the base unit.

Press

FWD/EDIT

(

Save

key).

•

A beep sounds.

•

To return to the standby mode, press

(FUNCTION/EXIT/CH)

•

If “Greeting only” is selected, the base unit display will become blank.

If you select “Greeting only”, the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages.

TAD program

=Yes

Save directory
Ringer volume

=Yes

Program
LCD contrast

=Yes

Save DIRECT#
Recall time

=Yes

Time/day Adj.

→

See manual for
other settings.

Preparing the Answering System

Содержание KX-TG2581ALS, KX-TG2581NZS

















































































Результаты поиска

Содержание KX-TG2581ALS, KX-TG2581NZS

Отзывы:

Panasonic KX-TG2581ALS, KX-TG2581NZS, Руководство по эксплуатации, Страница: 26 / 80

Результаты поиска

Содержание KX-TG2581ALS, KX-TG2581NZS

Отзывы: