manualshive.com logo in svg

Panasonic KX-TG2581ALS, KX-TG2581NZS, Руководство по эксплуатации, Страница: 32 / 80

Поделиться
Скачать
Panasonic KX-TG2581ALS, KX-TG2581NZS Скачать руководство пользователя страница 32

32

•

If “

No items stored

” is displayed, the Caller List is empty.

•

Caller information cannot be displayed in the following cases:

•

—If the caller dialled from an area which does not provide a Caller ID service,

the display will show “

Out of area

”.

•

—If the caller has requested not to display his/her information, the display will

show “

Private caller

”.

•

If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.

•

If the name display service is available in your area, the display will show caller’s
names. For further information, please contact your telephone company.

•

For additional information on Caller ID services and call waiting, please refer to
page 50.

While the handset is off the base unit:
The unit must be in the standby mode.

Press 

Ö

or 

Ñ

to turn the display on.

If you have received 10 new calls, 
the display will show the following:

While the handset is on the base unit:

If you have received 10 new calls, 
the display will show the following:

10 new calls

10 new calls

GF

H

=Directory

To check the number of new calls

For New Zealand Users:
Your telephone company may not support the second caller display feature.

Caller ID Service

Содержание KX-TG2581ALS, KX-TG2581NZS

















































































Отзывы:

Нет отзывов