manualshive.com logo in svg

Panasonic KX-TG2581ALS, KX-TG2581NZS, Руководство по эксплуатации, Страница: 73 / 80

Поделиться
Скачать
Panasonic KX-TG2581ALS, KX-TG2581NZS Скачать руководство пользователя страница 73

73

Useful Information

Problem

You cannot operate the
answering system with the
handset.

While recording a greeting
message, the unit starts to
ring and stops recording.

During playback, the unit
starts to ring and stops
playback.

The handset does not
display the name and/or
number of the caller whose
message is being played.

Cause & Remedy

•

Someone is operating the answering
system.

•

You are too far from the base unit. Move
closer to the base unit.

•

The unit is recording a message. 
To answer the call, press 

(TALK)

.

•

To answer the call, lift the handset off the
base unit or press 

(TALK)

. Start again

from the beginning after hanging up.

•

To answer the call, lift the handset off
the base unit or press 

(TALK)

. 

To resume playback, press

(NEW!MESSAGE/SLOW!TALK)

after

hanging up.

•

Place the handset on the base unit
correctly (p. 55).

•

If the caller is not stored in the Caller
List, the handset will not display the
caller’s information.

General

Problem

The unit does not work.

Cause & Remedy

•

Check the settings (p. 12–16).

•

Charge the battery fully (p. 13).

•

Clean the charge contacts and charge
again (p. 14).

•

Install the battery properly (p. 68).

•

Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.

•

Re-install the battery and place the
handset on the base unit (p. 68). 
Try again.

•

KX-TG2581AL and KX-TG2581NZ are
not designed to be used with rotary
(pulse dialling) services. 

Содержание KX-TG2581ALS, KX-TG2581NZS

















































































Отзывы:

Нет отзывов