Panasonic KX-TG2388 Скачать руководство пользователя страница 61

Страница: 61 / 76

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on Your
Display...” (p. 60) for the Cause & Remedy.

Problem

Cause & Remedy

“

No link to base.

Move closer to

base, try again.

” is

displayed and an alarm
tone sounds.

You are too far from the base unit. Walk closer to the
base unit.

Confirm the base unit’s AC adaptor is plugged in.

Raise the base unit antenna.

If the above remedies do not solve the problem, the
handset may have lost communication with the base
unit. Register the handset again (page 45).

Static, sound cuts in/out,
fades. Interference from
other electrical units.

Move the handset and base unit away from other
electrical appliances.

Walk closer to the base unit.

Raise the base unit antenna.

If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.

The handset and/or base
unit does not ring.

The ringer volume is turned off. Set to high, medium, or
low (page 39).

The handset display is
blank.

If the handset display is blank, fully charge the battery
(page 10).

You cannot program any
function items.

Programming is not possible while the handset and/or
base unit is being used.

Do not pause for over 60 seconds while programming.

Walk closer to the base unit.

While another user is listening to messages or the
Answering System is handling a call, you cannot
program. Try again later.

While programming or
searching, the handset
starts to ring and the
program/search stops.

A call is coming in. To answer the call, press

{C}

{s}

{

SP-PHONE

}

. Start again from the beginning after

hanging up.

TG2388.book 61 ページ２００６年８月３１日木曜日午前９時４０分

Содержание KX-TG2388













































































Результаты поиска

Содержание KX-TG2388

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TG2388, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2388

Отзывы:

Бренды по названию

Популярные бренды