Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport
51
Answering system commands
You can also operate the answering
system by pressing dial keys.
To use the following commands, press
{
MENU
}
, then select “
Message play
”.
*1 If pressed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, press a command
key within 15 seconds, or the voice
guidance will start.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
To call back the displayed number:
1
During playback, press
{
MENU
}
.
2
Press
{
Call
}
,
{C}
or
{s}
.
L
The unit stops playback and dials the
phone number.
L
If you need to edit the phone number to
call back, see page 30.
Recording a memo
message
You can record a voice memo message of
up to 3 minutes in memory.
1
Press
{
MEMO
}
.
2
After the long beep, talk clearly, about
20 cm (8 inches) away from the
MIC
.
L
The base unit display shows the
elapsed recording time.
L
If the elapsed recording time exceeds
99 seconds, the counter continues
from 00 to indicate 100 seconds.
3
When finished, press
{
MEMO
}
or
{
STOP
}
.
L
The NEW MESSAGE indicator
flashes.
L
If you record for over 3 minutes in step 2,
the unit will stop recording.
L
If “ ” is displayed, 6 beeps sound and
“
Your message was not recorded.
Record your message again.
” is
announced, start again from step 1.
Key
Command
{
1
}
or
{
Repeat
}
Repeat message (during
playback)
*1
{
2
}
or
{
Skip
}
Skip message (during
playback)
{
3
}
Change the playback
speed to slow/normal
{
4
}
Play new messages
{
5
}
Play all messages
{
8
}
Turn answering system on
{
9
}
Stop playback
*2
{
0
}
Turn answering system off
{*}{
4
}
Erase this message
(during playback)
{*}{
5
}
Erase all messages
{
STOP
}
MIC
{
MEMO
}
NEW MESSAGE Indicator
TG2388.book 51 ページ ２００６年８月３１日 木曜日 午前９時４０分
