Panasonic KX-TG2388 страница 60 Скачать руководство пользователя

Страница: 60 / 76

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

If the Following Appear on Your Display...

The following will be displayed when the unit needs your attention.

Display message

Cause & Remedy

Recharge battery

The battery needs to be charged. Recharge the battery
(page 10).

Charge for 6h

The battery has been discharged. The handset will not
work. Fully charge the battery (page 10).

No link to base.

Move closer to

base, try again.

The handset has lost communication with the base unit.
Walk closer to the base unit and try again or re-register
the handset (page 45).

Confirm the base unit’s AC adaptor is plugged in.

Raise the base unit antenna.

Please lift up

and try again.

A handset button was pressed while the handset was on
the base unit or charger. Lift the handset and press the
button again.

Busy

The base unit is in use. Try again later.

Error!!

When you tried to re-register the handset, the handset
and base unit could not link for some reason, such as
interference from electrical appliances. Move the handset
and base unit away from any electrical appliances and try
again.

Phone book full

When you tried to store an item in the phonebook, the
phonebook memory was full. Press

{

OFF

}

to exit the

programming mode. To erase other items from the
phonebook, see page 24.

System is busy.

Please try again

later.

The handset has lost communication with the base unit.
Walk closer to the base unit and try again.

The Answering System is in use, such answering a call or
playing back messages. Try again later.

Line in use

The base unit is conducting an outside call or another
phone on the same telephone line is in use.

Line on hold

The base unit is on hold for an outside call.

TG2388.book 60 ページ２００６年８月３１日木曜日午前９時４０分

Содержание KX-TG2388













































































Результаты поиска

Содержание KX-TG2388

Отзывы:

Похожие инструкции для KX-TG2388

Бренды по названию

Популярные бренды

Panasonic KX-TG2388, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2388

Отзывы:

Похожие инструкции для KX-TG2388

Бренды по названию

Популярные бренды