Making/Answering Calls
16
For assistance, please visit http://www.panasonic.com/consumersupport
Making calls
Using the handset
1
Lift the handset and press
{C}
.
L
“
Talk
” is displayed.
2
Dial the phone number.
3
When finished talking, press
{
OFF
}
or
place the handset on the base unit or
charger.
To use the speakerphone
1
Lift the handset and press
{s}
.
L
“
SP-phone
” is displayed.
2
Dial the phone number.
3
When the other party answers, speak
into the microphone.
4
When finished talking, press
{
OFF
}
or
place the handset on the base unit or
charger.
Note:
L
Talk alternately with the caller in a quiet
room.
L
If the other party has difficulty hearing
you, press
{V}
to decrease the speaker
volume.
L
While on a call, you can switch from the
receiver to the speakerphone by
pressing
{s}
. To switch back to the
receiver, press
{C}
.
To dial after confirming the entered
number (Pre-dial)
1
Enter the phone number.
L
The handset announces each button
you press, including
{
1
}
to
{
0
}
,
{*}
(“
Star
”),
{#}
(“
Pound
”),
{
FLASH/
CALL WAIT
}
(“
Flash
”) and
{
Pause
}
.
L
The announcement is heard at the
speaker volume. To increase or
decrease volume, press
{^}
or
{V}
.
L
If you misdial, press
{
Clear
}
. Enter
the correct number.
L
If a pause is required when dialing,
press
{
Pause
}
where needed
(page 17).
L
To cancel, press
{
OFF
}
.
2
Press
{C}
or
{s}
.
3
When finished talking, press
{
OFF
}
or
place the handset on the base unit or
charger.
Note:
L
If the Handset Talking Keypad is turned
off (page 44), the handset will not
announce the buttons you press.
{V}
,
{^}
{
REDIAL
}
Microphone
{
OFF
}
{
HOLD/INTERCOM
}
Display
{C}
{s}
Soft Keys
The handset will not make
announcements, when:
• the Handset Talking Keypad is turned
off
• the Answering System is in use
• the handset has lost communication
with the base unit
• the base unit is announcing
• the base unit is making an outside
call.
TG2388.book 16 ページ ２００６年８月３１日 木曜日 午前９時４０分
