Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport
53
Voice guidance
During remote operation, the unit’s voice
guidance will prompt you to press
{
1
}
to
perform a specific operation, or press
{
2
}
to listen to more available operations.
Operations are presented by voice
guidance in the following order:
– Play back all messages
– Play back new messages
– Record a message
– Erase all messages
– Record your greeting message
Note:
L
If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit will announce, “
Thank
you for your call
” then disconnect your
call.
L
If less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
L
If the unit announces “
Memory full
”,
erase unnecessary messages.
Remote commands
You can press dial keys to access certain
answering system functions without
waiting for the voice guidance to prompt
you.
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1
Dial your phone number.
2
Let the phone ring 15 times.
L
The unit will answer your call with the
greeting message.
L
You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 52).
Key
Remote command
{
1
}
Repeat message (during
playback)
*1
{
2
}
Skip message (during
playback)
{
3
}
Change the playback speed
to slow/normal.
{
4
}
Play new messages
{
5
}
Play all messages
{
7
}
Record a greeting message
{
9
}
Stop (recording, playback)
*2
{
0
}
Turn answering system off
{*}{
4
}
Erase this message (during
playback)
{*}{
5
}
Erase all messages
TG2388.book 53 ページ ２００６年８月３１日 木曜日 午前９時４０分
