Panasonic KX-TDA50, Руководство по программированию

Страница: 600 / 726

2.12 [6] Feature
600 PC Programming Manual
Programming Manual References
2.16.2 [10-2] DIL Table & Port Settings—CLI for DIL—CLI Ring for DIL—Day, Lunch, Break, Night
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—Day, Lunch,
Break, Night
Feature Manual References
1.3.1 Caller ID
1.3.12 CLI (Calling Line Identification) Distribution
2.12.2 [6-2] Caller ID Modification
The telephone numbers of incoming callers can be modified automatically by a Caller ID Modification
Table, and then recorded for calling back.
Caller ID Modification
The PBX looks for incoming telephone numbers that begin with an area code programmed in the
Caller ID Modification Table assigned to that trunk group. If it finds such a code, it removes digits and
adds a number to the telephone number. If this modified telephone number is stored as a System
Speed Dialing number, the caller's name can be shown on a PT display and the call can be routed to
a certain extension (CLI destination). A maximum of 4 Caller ID Modification Tables, each containing
10 local/international call data and 1 long distance code, can be programmed. Each trunk group can
select a table for use. Select the desired table from the
Modification Table list.
If the telephone number does not contain an area code programmed here, it is modified based on the
Long Distance Code settings.
Area Code (for Local / International Call Data 1–10)
Specifies the leading number (area code) to look for in the incoming caller's number.
Default
Not stored.
Value Range
Max. 6 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.3.1 Caller ID
Removed Number of Digits
Specifies the number of digits to be removed from the beginning of the incoming caller's number.