Panasonic KX-TDA0155 Скачать руководство пользователя

Страница: 49 / 54

8 Wall Mounting

Mounting

WARNING

•

Make sure that the wall that the unit will be attached to is strong enough to support the unit
(approx. 310 g). If not, it is necessary for the wall to be reinforced.

•

Only use the wall-mounting equipment (screws, washers) included with the unit.

•

When this product is no longer in use, make sure to detach it from the wall.

CAUTION

•

When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.

•

Do not stretch or bend the cables. Also, do not allow anything to rest on the cables.

•

Use cables that are fire-resistant or fireproof.

•

The CS and the cables should never be placed near or over a radiator or other heat source.

•

Do not bundle cables that are connected to the CS with the AC power cords of machines located
nearby.

•

Make sure the cables are securely fastened to the wall.

Place the reference for wall mounting on the wall to mark the 2 screw positions.

Install the 2 screws and washers (included) into the wall.

Note

•

Make sure that the screw heads are at the same distance from the wall.

•

Install the screws perpendicular to the wall.

Hook the CS on the screw heads.

KX-TDA0155/KX-TDA0156

Washer

Drive the screw
to this point.

Quick Installation Guide

8 Wall Mounting

Содержание KX-TDA0155























































Результаты поиска

Содержание KX-TDA0155

Отзывы:

Похожие инструкции для KX-TDA0155

Бренды по названию

Популярные бренды

Panasonic KX-TDA0155, Быстрое руководство по установке

Результаты поиска

Содержание KX-TDA0155

Отзывы:

Похожие инструкции для KX-TDA0155

Бренды по названию

Популярные бренды