Panasonic KX-TD1232G Скачать руководство пользователя страница 91

Страница: 91 / 250

4.2

DPT Features

DPT Features

4-7

4. Hang up or press the SP-PHONE/MONITOR button.

Cancelling

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (750) and 0.

• You hear a confirmation tone and then a dial tone.

• The display shows:

3. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• The selected message is displayed every time you go off-hook.

• Regarding Message 3;

1) If the extension number you want to dial has four characters, refer to System

Programming to change the setting of the characters.

2) If the extension number you want to dial has less than three characters, dial “ ” or “#”

to make it up to three characters.

• With the KX-T7235, you can execute this feature with the display operation.

Programming References

• System Programming — Installation Manual

[008] Absent Messages

[100] Flexible Numbering, Absent message

[990] System Additional Information, Field (41)

Feature References

System Feature Access Menu — Absent Message Capability (4.4/Special Display Features)

Message Cancel

Содержание KX-TD1232G



























































































































































































































































Результаты поиска

Содержание KX-TD1232G

Отзывы:

Panasonic KX-TD1232G, Руководство пользователя, Страница: 91 / 250

Результаты поиска

Содержание KX-TD1232G

Отзывы: