Panasonic KX-TD1232G Скачать руководство пользователя страница 76

Страница: 76 / 250

3-8

User Programming (Manager Programming)

3.2

User Programming (Manager Programming)

Date and Time Set

(contd.)

000

12.

Enter the hour.

To change the current entry, press CLEAR and the new hour.

13.

Press

→

14.

Enter the minute.

To change the current entry, press CLEAR and the new minutes.

15.

Press STORE.

16.

Press END.

Conditions

• After changing an entry, you can press STORE. You do not have to perform

all of the rest of the steps.

• To go back to the previous field, press

←

at steps 4 through 9 and steps 13

through 14.

• If you hear the alarm after pressing STORE, check that the date is valid.

• The clock starts immediately after the STORE button is pressed.

• You cannot leave the entry empty.

• The time is adjusted automatically, if the first outgoing call is made after

three o’clock each morning.

Feature References

Installation Manual, Section 3, Features,

Display, Time and Date

Содержание KX-TD1232G



























































































































































































































































Результаты поиска

Содержание KX-TD1232G

Отзывы:

Panasonic KX-TD1232G, Руководство пользователя, Страница: 76 / 250

Результаты поиска

Содержание KX-TD1232G

Отзывы: