Panasonic KX-TD1232G, Руководство пользователя, Страница: 41 / 250

Station Programming
2-17
2.2 Programming
Account Code Set
Allows you to assign the account code.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Dial 9.
2. Enter the ID Code (4 digits).
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 8.
4. Dial the account table number (01 through 40) or press the NEXT
(S3) button until the account table number will be designated.
• If the account code has not been assigned, the display shows “Not
Stored.”
5. Press the CLR (S2) button.
• The message of the display disappears.
6. Dial the new account code.
• Enter the new account code with 5 digits.
(— xx: account table number)
(— aaaaa: account code number)
• To erase an incorrect entry, press the CLR (S2) button.
7. Press the STORE button.
• The display shows the new account code.
8. Press the PREV ( ) button or END ( ) button.
• PREV ( ) — return to step 4.
• END ( ) — return to the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The Account Code of the account table number (01) is used for the Private call.
• Using this account code cannot print out the dialed telephone number by SMDR.
• You must assign the ID code through System Programming.
Charge Meter
xx : aaaaa
CLR NEXT
1
2
3
4
5
9
8
ID Code
account table number
or
S 1
S 2 S 3
CLR
7
...
8
6
account code