manualshive.com logo in svg

Panasonic KX-TD1232G, Руководство пользователя, Страница: 169 / 250

Поделиться
Скачать
Panasonic KX-TD1232G Скачать руководство пользователя страница 169

4.2

DPT Features

L

DPT Features

4-85

Setting Live Call Screening

When the telephone is idle and on-hook;

1. Press the Live Call Screening button.

• The display shows:

2. Enter the password (000 through 999).

• The Live Call Screening indicator light turns red.

Cancelling Live Call Screening

During the telephone is idle and on-hook;

1. Press the Live Call Screening button.

• The Live Call Screening indicator light turns off.

In the Hands-free mode;

When callers are connected to your voice mailbox, message recording is monitored
automatically through your extension speaker. While monitoring in the Hands-free mode, the
Live Call Screening indicator light flashes green slowly.

Having a conversation with the party

1. Lift the handset or press the SP-PHONE/MONITOR button, or

press the Live Call Screening button.

• The Live Call Screening indicator light turns steady red from

slow green flashing.

• In Keep Recording mode, the Two-Way Record indicator turns

on. Pressing the Two-Way Record button cancels the recording
and the light turns off.

Stopping monitoring

1. Press the FLASH button or the Live Call Screening Cancel button.

• The Live Call Screening indicator light turns steady red from

slow flashing green.

1

1

LCS

1

2

password

LCS

LCS

1

Содержание KX-TD1232G



























































































































































































































































Отзывы:

Нет отзывов