Panasonic KX-TD1232G Скачать руководство пользователя страница 161

Страница: 161 / 250

4.2

DPT Features

DPT Features

4-77

Handsfree Operation

Allows you to dial and to talk to the other party without lifting the handset.

1. Press the SP-PHONE button.

• The microphone and the speaker are now activated and handsfree

operation is available.

Switching from handset to handsfree mode

1. Press the SP-PHONE button.

2. Hang up.

• Do not replace the handset without pressing the SP-PHONE

button, or the line will be disconnected.

Switching from handsfree to handset mode

1. Lift the handset.

Conditions

• Helpful hints for Handsfree operation:

— Use this unit in a quiet room for best performance.

— If the other party has difficulty hearing you, decrease the volume.

— If you and the other party speak at the same time, parts of your conversation will be lost.

To avoid this, speak alternately.

• Handsfree mode will be cancelled if you do not start dialing within ten seconds.

• The KX-T7250 has a MONITOR button instead of a SP-PHONE button. It can be used for

handsfree dialing, etc., but it cannot be used for handsfree conversation.

• You may also enable handsfree mode by pressing a CO or INTERCOM button directly.

• A single press of a One-Touch Dialing, DSS, REDIAL or SAVE button also provides

handsfree mode if “Full One-Touch Dialing” is enabled.

Feature References

Full One-Touch Dialing

Содержание KX-TD1232G



























































































































































































































































Результаты поиска

Содержание KX-TD1232G

Отзывы:

Panasonic KX-TD1232G, Руководство пользователя, Страница: 161 / 250

Результаты поиска

Содержание KX-TD1232G

Отзывы: